Scenario Toolchain Steps Previous step Next step

Table of Contents

Introduction

This is the second step of the analysis at national level.

To Top

Calculation of decentral heat supply

In the third step, the costs and emissions of heat supply via decentral technologies are calculated. This calculation should be performed for different representative buildings in the country/region of interest. While for district heating representative cities/areas have been developed in step 1 of the approach, typical buildings in each EU Member State data can be found in the Hotmaps default database. Also, for many EU countries detailed building typologies (building archetypes) with data on heat demand before and after renovation can be found in statistics and literature.

The CM - Decentral heating supply can be used to calculate the costs and emissions of heat supply via different decentral technologies. The module uses data on heat demand as well as data on costs of technologies and prices for energy carriers to calculate the levelised costs of heat supply [EUR/MWh] for the different technologies in the different typical buildings and renovation states. The following figure shows this procedure graphically and shows the various data sources feeding into the CM - Decentral heating supply.

Figure: Calculation of decentral heat supply (Step 3)

The calculations can be used to identify costs and benefits of various supply technologies in different representative buildings and their sensitivity to important influencing parameters like energy carrier and CO2 prices or interest rate and depreciation time.

The outcomes of this step are the costs of heat supply via decentral technologies [EUR/MWh] in each of the representative buildings and the related CO2 emissions [kt/yr]. These results will then be used in the overall scenario comparison in step 4.

To Top

How to cite

Marcus Hummel, Giulia Conforto, in Hotmaps-Wiki, Guidelines for using the Hotmaps toolbox for analyses at national level (August 2020)

To Top

Authors and reviewers

This page is written by Marcus Hummel and Giulia Conforto*.

  • This page was reviewed by ...**.

* e-think, Zentrum f. Energiewirtschaft und Umwelt, Argentinierstrasse 18/10, 1040 Wien

To Top

License

Copyright © 2016-2019: Marcus Hummel

Creative Commons Attribution 4.0 International License This work is licensed under a Creative Commons CC BY 4.0 International License.

SPDX-License-Identifier: CC-BY-4.0

License-Text: https://spdx.org/licenses/CC-BY-4.0.html

To Top

Acknowledgement

We would like to convey our deepest appreciation to the Horizon 2020 Hotmaps Project (Grant Agreement number 723677), which provided the funding to carry out the present investigation.

To Top

View in another language:

German*

* machine translated

Scenario Toolchain Steps Previous step Next step